HS002	APPLICATION QUESTIONNAIRE

HUMPHREE Application:		Trim  	List  		Steering  

General Data
1.	Yard no.  						Project no.  			
2.	Ship’s name  					Type of vessel  			
3.	Type of hull:	Mono  	Cat  		WPC  	SES  		SWATH  
4.	
γ

b

β

s

Classification Society  				
5.	Requested Delivery Time  				

Main Static Dimensions
1.	LOA  	     m.			LWL  		 m.
2.	Transom:	Beam (b) 		 m.	Deadrise (β) 	   deg.	Inclination (γ) 		 deg.
3.	Demi-hulls offset (s) 		 m.	(see drawings)
4.	Displacement:		Light load  		 t.		Full load  		 t.
5.	Material (as UNI-DIN):	Hull  					Transom  		
6.	LCG fwd. of transom:	Light load  		 m.		Full load  		 m.
7.	Static regime:		Trim  			 m.		Transom draft  		 m.
8.	Updated lines / plan of aft body:		Delivered  		Not Delivered  
9.	Updated transom drawing:			Delivered  		Not Delivered  

Transom Appendages (if any)
1.	Type of appendage:		Flap  			Wedge  
2.	Flap / wedge data:		Chord (c)  		 mm.		Span  		   mm.
3.	Wedge angle  		 deg.		Min. / Max. flap angle  		 / 	   deg.

Other Control Surfaces (if any)
1.	Type of control surface:		rudder			fin			foil  
2.	Type of section profile:		airfoil			wedge			parabolic  
3.	Chord  		 mm.		Thickness-to-chord ratio (t/c) 		
4.	
c

t

Projected area  		 m2	Aspect ratio  		
5.	Maximum angle of attack  		 deg.
6.	Distance of surface’s centre from transom  		 m.

Performance & Propulsion
1.	Type of propulsion:			propeller  		waterjet	  		mixed  
2.	No. of working units at:		cruising  	    	maximum  		
3.	Prop data:		D  		 m.	Z  		P/D  			EAR  		
4.	WJ data:		steering	  	booster  	Intake Ø 	    cm. 	 Manufact. 		
5.	Max. DHP per shaft  		 kW				MCR  		 rpm
6.	Predicted ship speed at:		service  	  kn.		MCR  		  kn.
7.	Dynamic regime:			Trim  		 m.		Transom draft  		 m.
8.	Flap angle vs. ship speed at:	service  	 deg.		MCR  		 deg.
9.	Resistance data:			Delivered  		Not Delivered  
10.	Thrust curves:			Delivered  		Not Delivered  

Product Data
1.	Interceptor stroke 		 mm.	Pressure level 		 bar	Time to max. stroke 	        s.
2.	Weight limitation  			 kg.		Cylinder protection case:      Yes  	No  
3.	Interceptor’ support plate:		Welded  		Bolted  
4.	Primer:   Yes  	No  		Painting:   Yes       No  	Antifouling:  Yes  	No  

Hydraulic system
1.	Power pack(s) required:   Yes 	 No 		_________		   (See technical specs)

Electric and Control system
1.	Power supply:	 AC  ____ phase - ________ V - _______ Hz
 			 DC  ______ V
 			Redundancy	Yes 	No 		UPS  Yes 	No 
2.	RCS:		Yes 	No 
Remote control	Yes 	No 
Communications with Vessel Systems:   No	 Digital/Analog Signals	 Serial or Fieldbus
3.	Steering:		 No	 On/Off	 Analog Signal ( _______________ )
 			 Manual control	 Autopilot
4.	Vessel speed:	 Analog ( ____________ ) 	 NMEA	 Other ( ________________ )
 	source:		 Wheel	 GPS

Comments:												

Date 			

Client signature ____________________	HS signature ____________________